(01)
START
Plug the heater into a charging adapter that supports the included USB-C cable (adapter not included). Charging symbols appear on the display.
Make sure the silicone ring is inserted into the heater. Make sure the ring is the right way round.
(02)
Screw
Screw the desired adapter onto the heater and check that the silicone ring at the top of the adapter is correctly positioned. Make sure the ring is the right way round. It acts as a seal and prevents the bottle from leaking.
Fill the bottle with the desired liquid, then turn the heater upside down and screw the heater onto the bottle neck.
(03)
Heat
Turn the bottle back upright and hold the button on the bottom of the heater until it starts. Then press the same button several times to select the desired temperature. When the selected temperature is reached, the heater will beep. Done!
Adapters
When buying Benti, three adapters are included in the package.
1. Adapter for Medela
Our adapter for Medela is versatile and fits several popular bottle brands. Below you will find a list of bottles compatible with this adapter:
-
Dr. Brown's (for narrow neck bottles)
-
Esska (for bottles with a narrow neck)
-
Nanobébé breast milk bottle (with Nanobébé's accompanying breast pump adapter)
-
BIBS
2. Adapter for MAM
This adapter makes MAM bottles fit smoothly in your bottle warmer. Provides even heating and a secure fit for easy use.
3. Adapter for Twistshake
Perfect for using Twistshake bottles with the wireless bottle warmer. Safe and compliant.
Philips Avent
Philips Avent Natural Response screws directly onto the bottle warmer without an adapter.
When Warming Breast Milk
Do not leave the heater on for longer than 30 minutes. The nutrients in the breast milk begin to deteriorate and the milk becomes bad
When warming breast milk, make sure not to heat it above 37 degrees Celsius.
Can also be used to thaw/warm frozen breast milk.
For best heating results, it is recommended to occasionally swirl the breast milk while it is heating.
Safety Instructions
-
This product should always be used by an adult.
-
Clean the heater before first use.
-
Do not use caustic cleaners, antibacterial cleaners or highly concentrated detergents. They can cause plastic components to crack. If this occurs, replace them immediately.
-
Wash your hands before touching sterilized parts.
-
Do not leave the heater in sunlight or in heat for long periods as this may damage the heater.
-
After heating liquids, you should check the temperature by dripping a little on the back of your hand.
-
Do not immerse the heater in any liquid. To clean on the go, you can use a wet wipe.
-
Do not touch stainless steel parts during heating.
-
Allow the heater to cool before cleaning.
-
Unplug the heater when not charging.
-
Do not heat liquids while charging.
-
Avoid overcharging and shocks (for example falling from high surfaces) as this may damage the heater.
CLEANING OF BENTI
Benti is waterproof, but do not submerge it in water as damage may occur.
1
STEP 01
Disconnect the USB-C cable and make sure the USB input is sealed. This is important as the heater should not be used if water gets inside the heater.
2
STEP 02
Turn off the heater, if it is on, by holding the button on the bottom.
3
STEP 03
Clean with water and detergent and dry.